Home | Chain Saws | Chain Saw Chain | Bar Mount Patterns | Carburetors | Manufacturers | Trademarks | Collectors | Bulletins | Events | Stolen Saws | Chain Saw Age Reprints | Newsletter | Marketplace | Parts Sources | Cartoons | Links | Your Host



Model: 1110

MANUFACTURED BY:
PIONEER SAWS LTD.
PETERBOROUGH, ONTARIO, CANADA
SERIES OR ASSEMBLY NUMBER:
YEAR INTRODUCED:
1965
YEAR DISCONTINUED:
1966
ENGINE DISPLACEMENT:
3.3 cu. in. (54ccm)
NUMBER OF CYLINDERS:
1
CYLINDER BORE:
1.750 in. (44mm)
PISTON STROKE:
1.325 in. (35mm)
PISTON RING THICKNESS:
CYLINDER TYPE:
Chrome plated aluminum
INTAKE METHOD:
Reed valve
MANUFACTURER ADVERTISED H.P.:
not advertised
WEIGHT:
OPERATOR CONFIGURATION:
One Man operation
HANDLEBAR SYSTEM:
Rigid
CHAIN BRAKE:
none
CLUTCH:
Centrifugal
DRIVE TYPE:
Direct
CONSTRUCTION:
Die cast magnesium
MAGNETO TYPE:
Wico
CARBURETOR:
Tillotson HS-12A series
MAJOR REPAIR KIT:
RK-23HS
MINOR REPAIR KIT:
DG-5HS/T
AIR FILTER SYSTEM:
Flocked wire screen
STARTER TYPE:
Pioneer automatic rewind
OIL PUMP:
Manual
MAXIMUM ENGINE RPM:
7,000
IDLE RPM:
IGNITION TIMING:
fixed
BREAKER POINT SETTING:
0.015 in. (0.38mm)
FLYWHEEL/COIL AIR GAP:
Position is fixed
SPARK PLUG TYPE:
Champion CJ8
SPARK PLUG GAP:
0.030 in.
CRANKSHAFT MAIN BEARINGS:
Caged needle roller (Torrington) type
FUEL TANK CAPACITY:
20 fl. oz. (600 ml)
FUEL OIL RATIO:
16:1
RECOMMENDED FUEL OCTANE:
Regular
MIX OIL SPECIFICATION:
OMC two-cycle motor oil
CHAIN PITCH:
3/8 in.
CHAIN TYPE:
Pioneer Sureguard
BAR MOUNT PATTERN:
01 link
SHORTEST GUIDE BAR SUPPLIED:
16 in.
LONGEST GUIDE BAR SUPPLIED:
20 in.
COLOUR SCHEME:
Pioneer Yellow enamel
PAINT CODES:
ILLUSTRATED PARTS LIST:
SERVICE MANUAL:

COMMENTS:


Colour photograph courtesy Erik Johansson


 

Reproduction of this World Wide Web Site in whole or in part is prohibited without permission.
Copyright © 2000-2021 MIKE ACRES - All rights are reserved.