Home | Chain Saws | Chain Saw Chain | Bar Mount Patterns | Carburetors | Manufacturers | Trademarks | Collectors | Bulletins | Events | Stolen Saws | Chain Saw Age Reprints | Newsletter | Marketplace | Parts Sources | Cartoons | Links | Your Host



Model: Torpedo

MANUFACTURED BY:
PM (Power Machinery Ltd.)
VANCOUVER, BRITISH COLUMBIA, CANADA
SERIES OR ASSEMBLY NUMBER:
YEAR INTRODUCED:
1952
YEAR DISCONTINUED:
ENGINE DISPLACEMENT:
NUMBER OF CYLINDERS:
1
CYLINDER BORE:
PISTON STROKE:
PISTON RING THICKNESS:
CYLINDER TYPE:
Aluminum with chrome plated bore
INTAKE METHOD:
Reed valve
MANUFACTURER ADVERTISED H.P.:
6 @ 4200 rpm
WEIGHT:
36 lbs. (16.3kg.) powerhead only
OPERATOR CONFIGURATION:
One man or two man
HANDLEBAR SYSTEM:
Rigid
CHAIN BRAKE:
none
CLUTCH:
Centrifugal
DRIVE TYPE:
Bevel gear transmission
CONSTRUCTION:
Sand cast magnesium
MAGNETO TYPE:
Wico
CARBURETOR:
Tillotson MD float type
MAJOR REPAIR KIT:
nla
MINOR REPAIR KIT:
nla
AIR FILTER SYSTEM:
Wire Screen
STARTER TYPE:
Automatic Rewind
OIL PUMP:
Manual Pump
MAXIMUM ENGINE RPM:
4200
IDLE RPM:
IGNITION TIMING:
fixed
BREAKER POINT SETTING:
0.018 to 0.020 in.
FLYWHEEL/COIL AIR GAP:
fixed, not adjustable
SPARK PLUG TYPE:
Champion J-8
SPARK PLUG GAP:
0.025 in.
CRANKSHAFT MAIN BEARINGS:
Ball
FUEL TANK CAPACITY:
FUEL OIL RATIO:
1 pint to 1 gallon Imperial measure
RECOMMENDED FUEL OCTANE:
Regular
MIX OIL SPECIFICATION:
SAE 50
CHAIN PITCH:
9/16 in.
CHAIN TYPE:
PM chipper
BAR MOUNT PATTERN:
SHORTEST GUIDE BAR SUPPLIED:
26 in. (66 cm)
LONGEST GUIDE BAR SUPPLIED:
60 in. (152 cm)
COLOUR SCHEME:
Red wrinkle finish enamel
PAINT CODES:
ILLUSTRATED PARTS LIST:
SERVICE MANUAL:

COMMENTS:




 

Reproduction of this World Wide Web Site in whole or in part is prohibited without permission.
Copyright © 2000-2021 MIKE ACRES - All rights are reserved.