Home | Chain Saws | Chain Saw Chain | Bar Mount Patterns | Carburetors | Manufacturers | Trademarks | Collectors | Bulletins | Events | Stolen Saws | Chain Saw Age Reprints | Newsletter | Marketplace | Parts Sources | Cartoons | Links | Your Host



Model: DCS 510

MANUFACTURED BY:
MAKITA CORPORATION
ANJO, AICHI JAPAN
SERIES OR ASSEMBLY NUMBER:
YEAR INTRODUCED:
YEAR DISCONTINUED:
ENGINE DISPLACEMENT:
3.1 cu. in.
NUMBER OF CYLINDERS:
1
CYLINDER BORE:
1.77 in.
PISTON STROKE:
1.24 in.
PISTON RING THICKNESS:
CYLINDER TYPE:
Aluminum with Chrome plated bore
INTAKE METHOD:
Piston Ported
MANUFACTURER ADVERTISED H.P.:
3.3 kW @ 10,000 rpm
WEIGHT:
12.1 lbs. powerhead only
OPERATOR CONFIGURATION:
One Man
HANDLEBAR SYSTEM:
Anti-Vibration
CHAIN BRAKE:
Inertia activated, manual activation also
CLUTCH:
Centrifugal
DRIVE TYPE:
Direct
CONSTRUCTION:
Die cast Magnesium, injection molded polymer
MAGNETO TYPE:
Flywheel magneto with breaker points
CARBURETOR:
ZAMA
MAJOR REPAIR KIT:
MINOR REPAIR KIT:
AIR FILTER SYSTEM:
STARTER TYPE:
Dolmar automatic rewind
OIL PUMP:
Automatic, tank capacity 9.1 fl. oz.
MAXIMUM ENGINE RPM:
13,500
IDLE RPM:
2,500
IGNITION TIMING:
Fixed
BREAKER POINT SETTING:
FLYWHEEL/COIL AIR GAP:
SPARK PLUG TYPE:
NGK BPMR7A, Bosch WSR6F
SPARK PLUG GAP:
0.5 mm (0.020 in.)
CRANKSHAFT MAIN BEARINGS:
Ball
FUEL TANK CAPACITY:
15.9 fl. oz.
FUEL OIL RATIO:
50:1
RECOMMENDED FUEL OCTANE:
ASPEN2 pre-mixed Alkylate fuel
MIX OIL SPECIFICATION:
ASPEN synthetic mix oil, Dolmar Premium oil
CHAIN PITCH:
.325 in. optional 3/8 in.
CHAIN TYPE:
BAR MOUNT PATTERN:
SHORTEST GUIDE BAR SUPPLIED:
16 in. (40 cm)
LONGEST GUIDE BAR SUPPLIED:
18 in. (45 cm)
COLOUR SCHEME:
PAINT CODES:
ILLUSTRATED PARTS LIST:
SERVICE MANUAL:

COMMENTS:



 

Reproduction of this World Wide Web Site in whole or in part is prohibited without permission.
Copyright © 2000-2021 MIKE ACRES - All rights are reserved.