Home | Chain Saws | Chain Saw Chain | Bar Mount Patterns | Carburetors | Manufacturers | Trademarks | Collectors | Bulletins | Events | Stolen Saws | Chain Saw Age Reprints | Newsletter | Marketplace | Parts Sources | Cartoons | Links | Your Host



Model: 108 MAG

MANUFACTURED BY:
WHITEHEAD CHAIN SAW COMPANY
ATLANTA, GEORGIA, U.S.A.
SERIES OR ASSEMBLY NUMBER:
YEAR INTRODUCED:
1962
YEAR DISCONTINUED:
ENGINE DISPLACEMENT:
5.8 cu. in. (95 cc)
NUMBER OF CYLINDERS:
1
CYLINDER BORE:
2.0625 in. (52 mm)
PISTON STROKE:
1.750 in. (44.4 mm)
PISTON RING THICKNESS:
CYLINDER TYPE:
Aluminum with cast iron sleeve
INTAKE METHOD:
Reed valves
MANUFACTURER ADVERTISED H.P.:
4
WEIGHT:
OPERATOR CONFIGURATION:
One Man operation
HANDLEBAR SYSTEM:
Rigid
CHAIN BRAKE:
none
CLUTCH:
Centrifugal
DRIVE TYPE:
Direct
CONSTRUCTION:
Sand cast Magnesium
MAGNETO TYPE:
Wico FW2639
CARBURETOR:
Tillotson HL-122A
MAJOR REPAIR KIT:
RK-82HL
MINOR REPAIR KIT:
DG-1HL
AIR FILTER SYSTEM:
STARTER TYPE:
Fairbanks Morse automatic rewind
OIL PUMP:
Manual
MAXIMUM ENGINE RPM:
5,500
IDLE RPM:
IGNITION TIMING:
Position stator mid range of mounting screws.
0.15625 in. (3.9 mm) before TDC
BREAKER POINT SETTING:
0.020 in. (0.51 mm)
FLYWHEEL/COIL AIR GAP:
Position is fixed
SPARK PLUG TYPE:
Champion H8J
SPARK PLUG GAP:
0.030 in. (0.76 mm)
CRANKSHAFT MAIN BEARINGS:
Ball and caged needle roller
FUEL TANK CAPACITY:
FUEL OIL RATIO:
1/2 pint to 1 gallon = 16:1
RECOMMENDED FUEL OCTANE:
Regular grade 72 to 83
MIX OIL SPECIFICATION:
Two-cycle chain saw mix oil
CHAIN PITCH:
CHAIN TYPE:
BAR MOUNT PATTERN:
SHORTEST GUIDE BAR SUPPLIED:
LONGEST GUIDE BAR SUPPLIED:
COLOUR SCHEME:
PAINT CODES:
ILLUSTRATED PARTS LIST:
SERVICE MANUAL:

COMMENTS:
Used West Bend engine type 58016 series 1316



 

Reproduction of this World Wide Web Site in whole or in part is prohibited without permission.
Copyright © 2000-2021 MIKE ACRES - All rights are reserved.